Power Sensor Support & Power Zones
Ready for some Power? We are! Cranking up the Watts just makes you feel, well, powerful. And according to science, there is no more accurate version of calories burned than Kilojoules, something you can only get accurately by measuring watts. For cycling, it is the rage, and for good reason. If you are interested in learning more on the history and the power revolution, listen to this great podcast with Hunter Allen at VeloNews.
Pairing your Bluetooth low-energy Power Meter
Tap OK to pair with the sensor.
Note: If there are multiple sensors found, like if you are in a Spin(r) class, you will also see a proximity meter next to the sensors. Typically the most powerful signal is the one closest to you. Tap that sensor to pair.
Running a Workout with Power
Once your sensors are paired, simply hit the play/go button on the activity type you’re using the sensor on, or chose any number of ways you can start your workout / workout routines. It will acquire the sensor as you activate it, and begin the workout. If you want different data then what is shown on the default dashboard, you can easily setup custom dashboards, even one just dedicated to Power metrics. You also can swipe to a Power (Watts) graph, with Power Zones if you have set them up or done a Personal Power Assessment.
Setting Up / Editing Power Zones
Setting up Power Zones is easy, and allows you to start designing workouts specifically targeting different systems and improvements. You typically want to personalize your zone set (see more on the Personal Power Test (PPT) below) to customize your zones to your current fitness level (we are not fans of default zones here!! We are all individuals and very different, and we respect that!). If you are familiar with customizing and managing heart rate zones, it’s the same process.
Select your activity type for the Zones, tap the Gear / Activity Options icon.
Under the Preferences section, Tap Power Zones > Add Zone Set
Tap the title to change it, change the values on the right to modify them, tap the zone name to change those if you want.
To delete a zone set, in the Zone Set listing, tap edit, then tap the red delete icon on the left.
Personal Power Test (PPT) – Power Zone Assessment
Training at various intensities gives specific physiological adaptations. The most accurate way to categorize intensity ranges is by measuring the work-rates that cause various physiological responses. Power Zones are based on a percentage of a rider’s baseline fitness marker, known as Personal Power Threshold (PPT). PPT represents the rider’s ‘work-threshold’ or their current level of fitness. With power meter technology of the Spinner® Chrono or the Crank, the result of a relatively simple and straightforward test can accurately establish your PPT. Once determined, riders can train in their unique ranges based on a percentage of their PPT. Since power is dynamic and improvement in fitness will increase PPT, it is important to retest quarterly (or sooner) to track progress and re-establish zones that match the rider’s current fitness level.
The Personal Power Threshold Test (PPT Test) is a sub-maximal, repeatable test to determine PPT. It is:
• The personal results of an individual rider
• A scientifically validated incremental test
• Easy to learn
• Repeatable and Reliable
• Sub-maximal, and so can be performed by nearly everyone
After a 10 minute warm up (you can skip this by double tapping on the screen at any time), the test consists of back-to-back two-minute stages, in which the rider sustains a cadence goal within 5RPM of the target, while remaining a seated position, in Hand Position two. The first stage begins with light resistance on the flywheel. Each corresponding stage begins by increasing resistance, while keeping cadence and riding position the same.
The added resistance should be enough to feel the change, as if increasing RPE (Real Perceived Exertion) to the next level. This also noted as increased wattage. Since individuality and fitness level will determine the actual wattage change, it will generally be around 5–20 watts. Adding too much resistance will bring the rider to threshold too soon. Adding too little resistance will extend the overall duration of the PPT Test. Generally speaking, a rider should aim to complete 5-8 2 minute ramps to completion.
The graded ramp process continues until the rider can no longer sustain the workload for an entire two-minute stage. This will be noted by an obvious decline in the ability to sustain steady pedaling, cadence and riding position. The rider’s PPT is the workload sustained during the last fully completed stage.
Below are the guidelines for implementing the PPT Test. This assumes you have your power meter already paired (see above).
- Tap Indoor Cycling or Bike (outdoors)
- Tap the Activity Options (Gear Icon located in lower left of the Activity type screen)
- Tap Assessments
- Tap PPT Assessment
- Warm up countdown will begin. Warm-up for 10 minutes at an easy pace, shifting through different resistance loads and incorporating a few 10-20 second hard efforts. Include some transitions in and out of the saddle. You may advance to PST Test at any time during warm-up, by double tapping the countdown bar.
- After warm up, begin Ramp 1 with light resistance on the flywheel, at a low workload and cadence that feels relaxed and most natural. The app will begin to countdown 2 minutes. During this time, the app will use your current cadence to determine and set a cadence goal for the proceeding ramps.
- After 2 minutes, app will transition for 15 seconds to Ramp 2. During the 15 second countdown, the app will inform rider of cadence goal to sustain for next ramps. Increase resistance, while keeping target cadence and riding position the same. The added resistance should be enough to feel the change, as if increasing RPE to the next level. This will also be noted as increased wattage. The app will begin to countdown 2 minutes. Maintain the target cadence range, within 5 RPM, while maintaining riding position and resistance. The app will inform the rider if their cadence is higher or lower than the target cadence. After 2 minutes, app will transition for 15 seconds to Ramp 3. During the 15 second countdown, the app will inform rider to increase resistance, while keeping their target cadence and riding position the same. The added resistance should be enough to feel the change, as if increasing RPE to the next level. This will also be noted as increased wattage.
- The ramp process continues until the rider can no longer sustain the workload for the full 2 minute duration. At this time, rider will slide HEART ICON to stop the PPT Test.
- The app will display a summary of the PPT Test Ramps. Rider will choose the last fully completed as their PPT.
- Once the PPT is determined, unique Power Training Zones will be determined based on a percentage of PPT. Power Training Zones allows riders to build their training intensity and boost their current level of conditioning in their current training programs.